Assess and create temporary works items

Steps marked AI task are done for you by a PlanOps assistant.

1. 1Bring in the drawings, specifications and programmeAdd the structural drawings, specifications and method statements to the project, so the assessment has the real design and schedule to read from. The more it can see, the more of the temporary works it will find.Show guide
2. Run the temporary works assessmentAI task · Assistant HubPoint the assessment at your drawings and programme and let PlanOps identify the temporary works the job needs — the propping, falsework, scaffolds, excavations and the rest. It produces a schedule against BS 5975, CIRIA and TWf guidance and raises a register entry for each item, so nothing high-risk goes unrecorded.Details
3. 3Review the assessment and scheduleRead the report to see each temporary works it found, the risk it carries and the guidance behind it. Check the schedule matches the job before you rely on the new register entries.Show guide
4. 4Check the new register on the dashboardOpen the temporary works dashboard to see every item the assessment created and its status. The red, amber and green markers show you what still needs a design check, a sign-off or an inspection.Show guide
5. 5Fill in the details on each itemOpen each register item and set the details the assessment could not read from the documents — its location, category and how often it needs inspecting — so the record matches what is actually going up on site.Show guide
6. 6Set up the sign-offs under BS 5975For each item, set who needs to sign it off — the temporary works supervisor, designer, independent checker, contractor TWC and site manager — so approval is tracked and no work proceeds without it.Show guide
7. 7Link each item to its package and RAMSJoin each temporary works item to the work package it supports and the RAMS that covers it, so anyone can see which temporary works applies to which work and that its risk is assessed.Show guide